Manufacturer: | Absco |
---|---|
Model No.: | CARPORTS33 |
Range: | Single Skillion Roof Carport |
External Base Dimensions
Front | 3.00m |
---|---|
Side | 5.50m |
Overall Height | 2.25m |
Availability: | In Stock |
---|---|
Dispatch: | Estimated 20 Working Days |
Wind Rating: | W33-N2 |
Roof Line: | Skillion |
Packaging: | 1 Pallet: 3.04m L x 0.78m W x 0.19m D (128kgs) |
Colour Options
Zincalume & Colorbond® - Woodland Grey, Pale Eucalypt, or Classic Cream All Sheeting is 100% Bluescope Steel. Colorbond components refer to roof sheeting & fascia. RHS posts are always in a galvanised finish. The COLORBOND® steel colours shown on this site have been reproduced to represent actual product colours as accurately as possible. However this representation may be subject to the limitations of web palette colours &/or your screen settings, which may affect colour tones. Please also note- most printers do not accurately depict the true colours. Page printouts should not be used for colour matching purposes. |
Shipping Options
Please note: All freight deliveries are to the front of the property / driveway, only. They do not allow for placements down the side or rear of property.
- See Frequently Asked Questions "Freight & Shipping" For Terms/Conditions & Approximate Delivery Times - |
Select a Finish
Select a Shipping Option
Absco skillion roof carports are constructed of heavy duty galvanised steel framing, with solid RHS steel posts.
100% Bluescope steel used. Maintenance free all steel construction.
Includes a concealed guttering system that forms part of the roof frame & separate downpipes are included.
The majority of components are pre-punched & all fixings (including dynabolts to fasten to an suitable concrete slab or concrete footing).
Easy to follow DIY assembly instructions are included.
Engineers plans & certificates are included for local authority submission. (It is recommended that customers check their councils requirements before purchasing any product)
Specifications:
3m front x 5.5m side x 2.25m
Minimum clearance height is 2.06m
Carports are made to bolt down to an existing suitable - concrete slab or concrete footings (Refer to engineers drawings which can be provided before purchase).
600mm longer RHS posts are offered where required to account for any slope in your yard, for when you require additional clearance height, or should you elect to bury the additional post length in the ground & encase the same into the required concrete footing..
RHS posts are 65mm x 65mm square
Skillion roof carports are offered in two different wind ratings - W33/N2, & W50C. This Model CARPORTs33 is a W33/N2 Wind Rated Product.
Where carports are offered in full Colorbond®, the RHS posts & structural framework underneath, are galvanised steel only.
Where required, to assist with on-forwarding freight calculations the item is shipped as 1 item with the following pack dimension & weight - 3004mm long x 780mm wide x 190mm deep - 119kgs total weight.
Please refer to diagram below for positioning of the posts which are offset 1.355m from the outside corners
Materials: Absco products are manufactured from Australian made Bluescope Steel. Sheeting is available in Zincalume® (silver / galvanised finish) or Colorbond®.
Safety Edge: All ABSCO metal sheeting for sheds has a rolled safety edge to minimise the possibility of cuts & mishaps.
Manufactures’ Warranty: 30 year written warranty
Delivery & Freight:
DELIVERY of your Absco product can be made to selected regional & metropolitan depots. This is offered FREE of charge. The item will be available for your pick up or for you to make your own on-forwarding arrangements with the freight depot to get it to your home.
Door to Door delivery is also available. A fee is charged for this service. To see if you qualify & to determine the cost - complete the "Shipping Option" election in the product detail section.
Local Authority Approvals: Regulations vary amongst local authorities in Australia. However most require the homeowner to apply for approval for any structure that covers the ground more than 10 square meters. To make yourself aware of any possible restrictions or other compliance requirements, please check with your local council. Where applicable, there may be considerations regarding how close you can erect your product to boundary fences, sewers, stormwater mains etc.
All required documentation, including - engineers drawings, plans & certificates are available from Discountsheds.com.au at any time & are provided without charge or obligation (even prior to your financial commitment to purchase) - just contact us on 1300 834 738 or email us at sales@discountsheds.com.au.
Local Authority Approvals: Regulations vary amongst local authorities in Australia. However most require the homeowner to apply for approval for any structure that covers the ground more than 10 square meters. To make yourself aware of any possible restrictions or other compliance requirements, please check with your local council. Where applicable, there may be considerations regarding how close you can erect your product to boundary fences, sewers, stormwater mains etc.
1300 834 738